BroadRouter

BroadNet Gemma 4 VL 26B vs GLM 5.3

Updated

BroadNet Gemma 4 VL 26B costs $0.10 input and $0.22 output per 1M tokens; GLM 5.3 costs $0.78 and $3.46. GLM 5.3 reads more context: 1,048,576 tokens against 32,768. Pick BroadNet Gemma 4 VL 26B for the lowest price, free-credit trials and hourly keys. Pick GLM 5.3 for tool calling and structured output over long context.

These two sit at opposite ends of BroadNet’s range. BroadNet Gemma 4 VL 26B is the lowest-priced model, reads images and works on free credit, but has a 32,768-token context. GLM 5.3 is the highest-priced model per token, text only, with a 1,048,576-token context, reasoning, tool calling and structured output. Few workloads are a close call between them: the question is whether a job needs GLM’s context and tools, or can run on Gemma for a small fraction of the price.

Side by side

BroadNet Gemma 4 VL 26B compared with GLM 5.3
BroadNet Gemma 4 VL 26BGLM 5.3
Model IDbroadnet/gemma-4-26b-a4bbroadnet/glm-5.3
Input, per 1M tokens$0.10$0.78
Cached input, per 1M tokensNo cache discount$0.173
Output, per 1M tokens$0.22$3.46
Context window32,768 tokens1,048,576 tokens
Input typestext, imagetext
Reasons before answeringNot listedYes
Tool callingNot listedYes
Structured outputNot listedYes
Unlimited flat planNo, per token onlyNo, per token only
Flat-price hourly keyYes, $0.50 an hourNo
Works on free creditYesAfter a top-up

Prices in USD from BroadNet's rate card, synced 2026-11-14. "Not listed" means BroadNet's docs do not list the feature for that model, not that it is absent.

Report a wrong price or number (email to info@broadnet.ai, with this page's link filled in).

What the same workload costs

Each row is one month of a typical workload, priced at the published pay-as-you-go rates. Cached tokens bill at the cached rate where a model has one; BroadNet Gemma 4 VL 26B has no cache discount, so cached tokens bill as normal input. "Does not fit" means a single request is larger than the model's context window. Try your own numbers in the LLM API cost calculator.

Workload, per monthGemma 4 VL 26BGLM 5.3Cheaper
Support chatbot
50,000 turns of 3,000 input tokens (60% a cached system prompt and history) and 400 output tokens
$19.40$131.57Gemma 4 VL 26B, 85% less
RAG answers
20,000 questions with 8,000 tokens of retrieved passages (10% cached) and 500-token answers
$18.20$149.69Gemma 4 VL 26B, 88% less
Coding agent
200M input tokens (80% cache hits) and 10M output, with requests of about 120,000 tokens
Does not fit$93.48GLM 5.3 (only one fits)
Document extraction
5,000 documents of 12,000 input tokens each, returning 1,500 tokens of JSON
$7.65$72.75Gemma 4 VL 26B, 89% less

Per 1,000 chatbot turns, that is $0.388 on Gemma 4 VL 26B and $2.63 on GLM 5.3. Output is where the gap is widest: GLM 5.3 charges 15.7 times as much per output token and 7.8 times as much per input token. Long answers widen the gap.

Token efficiency: English, Arabic and code

Per-token prices only compare fairly if both models split text into the same number of tokens. They don't. We ran the same openly licensed texts through each model's published tokenizer and counted the tokens (measured 2026-11-15; the full data is in the tokenizer efficiency dataset). Fewer tokens for the same text means a lower bill and more room in the context window.

Text groupWordsGemma 4 VL 26B tokensGLM 5.3 tokensGemma 4 VL 26B per 100 wordsGLM 5.3 per 100 wordsGLM 5.3 vs Gemma 4 VL 26B
English prose118315371526129.9129.0-1%
Arabic (Modern Standard)390377912095230202.7243.9+20%
Gulf Arabic203458509225.6250.7+11%
Code: Python280655561233.9200.4-14%
JSON170684347019494.4411.4-17%

For English prose the two are within a few percent: 129.9 and 129.0 tokens per 100 words. Arabic is where they differ. On the Modern Standard Arabic texts, Gemma 4 VL 26B needs 202.7 tokens per 100 words and GLM 5.3 243.9. English takes about the same tokens on every model, so the Arabic premium is a property of the tokenizer: on the same sentences, Arabic costs 1.47× the tokens of the English translation on Gemma 4 VL 26B and 1.77× on GLM 5.3.

Cost per 1 million wordsGemma 4 VL 26BGLM 5.3
Send English (input)$0.13$1.01
Send Arabic (input)$0.20$1.90
Generate English (output)$0.29$4.46
Generate Arabic (output)$0.45$8.44

Tokens per word × price per million tokens, uncached, excluding reasoning tokens. Google's Gemma 4 26B A4B tokenizer. BroadNet's build is based on this model; we assume it keeps the base tokenizer. Method: English prose (4 texts, 1,183 words) and Modern Standard Arabic (4 texts, 39,037 words) from the tokenizer efficiency dataset, counted with the tokenizer.json from each model's Hugging Face repository at a pinned commit. Count your own text with the token counter or the Arabic token counter, and read why Arabic costs more tokens.

Context, file limits, plans and keys

Gemma 4 VL 26BGLM 5.3
Context per request32,768 tokens1,048,576 tokens
English words that fitabout 25,000about 813,000
Arabic words that fitabout 16,000about 430,000
Input typestext and image (image as a data: URL, billed as input tokens)text
Pay-as-you-go key30 requests a minute, 4 in flight30 requests a minute, 4 in flight
Unlimited plansNot availableNot available
Hourly key$0.50 for one hour: 1 stream, 120 requests a minute, 300,000 tokens a minuteNot available
Free starting creditYes, $5 with no cardAfter a top-up

The words-that-fit rows divide the context window by our measured tokens per word, and include the answer: a reasoning model's thinking also counts toward max_tokens and the window, so leave room for it. Every request on either model is processed with zero data retention: prompts, images and answers are not kept. For more on sizing prompts, see the context window calculator and what a context window is.

Worked example: A support widget with a long policy prompt

A website chat widget answers questions about a company’s policies. Every request carries the same 4,000-word English policy document as a system prompt, plus a 200-word conversation, and the reply is about 120 words. The policy prompt is identical every time, so about 95% of input can come from cache. The widget handles 100,000 turns a month.

Gemma 4 VL 26BGLM 5.3
Input tokens per request5,4575,418
Output tokens per request156155
Fits the context windowYesYes
Cost per 1,000 requests$0.58$1.64
Cost per month (100,000 requests)$58.00$163.73

This is the best case for GLM 5.3’s cache discount, because almost every input token repeats. Even so, Gemma 4 VL 26B stays cheaper here, since its full input rate is lower than even GLM 5.3’s cached rate and its output rate is far lower. The policy fits Gemma’s 32,768-token window with room to spare; a policy several times longer would not.

Tokens are the word counts above times each model's measured tokens per word for the “English prose” sample (input) and the “English prose” sample (output); 95% of input billed at the cached rate where the model has one. Reasoning tokens are not included and add to output on the reasoning models.

Strengths and weaknesses, with sources

Each point cites a public model card or BroadNet's own documentation, checked 2026-11-14. Points about token counts come from our measurement above.

Where BroadNet Gemma 4 VL 26B is stronger

  • Price: the lowest input and output rates on BroadNet; GLM 5.3’s output rate is more than fifteen times Gemma’s. (BroadNet docs)
  • Reads images. GLM 5.3 is listed for text only on BroadNet. (BroadNet docs)
  • Works on the free starting credit with no top-up, and is the hourly-key model (one stream, 120 requests per minute, 300,000 tokens per minute). (BroadNet docs)
  • Google reports 77.1 on LiveCodeBench v6 and 82.3 on GPQA Diamond for the Gemma 4 26B A4B base model, with only 3.8B parameters active per token. (Google card)
  • In our measurement Gemma’s tokenizer needs fewer tokens than GLM’s for Arabic text and about a third as many for Hindi.

Where GLM 5.3 is stronger

  • Context: 1,048,576 tokens against 32,768. Coding agents, long contracts and multi-document prompts fit only on GLM. (BroadNet docs)
  • BroadNet lists reasoning, tool calling and structured output for GLM 5.3; it lists none of the three for its Gemma build. (BroadNet docs)
  • Z.ai reports agentic results Gemma’s card does not cover, such as 88.2 on Terminal-Bench 2.1, 66.9 on DeepSWE v1.1 and 84.5 on CyberGym. (Z.ai card)
  • Cached input is billed at a lower rate on GLM 5.3. Gemma has no cache discount on BroadNet. (BroadNet docs)

Published benchmark numbers

BenchmarkGemma 4 VL 26BGLM 5.3
GPQA Diamond82.3 [Google card]88.1 [DeepSeek card]
Terminal-Bench 2.1not published88.2 [Z.ai card]
DeepSWE v1.1not published66.9 [Z.ai card]
LiveCodeBench v677.1 [Google card]not published
Context on BroadNet (tokens)32,768 [BroadNet docs]1,048,576 [BroadNet docs]

Google and Z.ai publish different benchmark sets, so only GPQA Diamond appears for both, and GLM-5.3’s GPQA figure comes from the comparison table in DeepSeek’s model card because Z.ai’s card does not list it. Gemma figures are for Google’s base model, not BroadNet’s build. Vendor figures, checked 2026-11-14; higher is better. None of these were run by BroadNet or BroadRouter. Before switching, evaluate both on your own data.

Which should you choose?

Pick BroadNet Gemma 4 VL 26B if…

  • requests are short and the budget is tight: on the chatbot workload Gemma costs a small fraction of GLM 5.3.
  • the input includes images such as receipts, forms or screenshots.
  • you are testing on free credit, or want a fixed hourly price for a demo or batch run.

Pick GLM 5.3 if…

  • any request exceeds 32,768 tokens.
  • your code depends on documented tool calling or JSON-schema structured output.
  • the job is agentic coding or multi-step reasoning, where GLM publishes strong results and Gemma’s card has no comparable numbers.

Or use both

A sensible pattern is Gemma 4 VL 26B for high-volume, short, image-bearing requests (reading a receipt into fields) and GLM 5.3 for the few long, tool-using steps that follow. Both answer on the same endpoint, so the router is one if-statement on prompt length and task type.

Before you switch

  • GLM 5.3 cannot read images on BroadNet. A common pattern is to have Gemma 4 VL 26B read the image into text first, then send that text to GLM 5.3.
  • Reasoning tokens bill as output at GLM’s rate, the highest on BroadNet. GLM’s card defaults to maximum reasoning effort; on easy requests ask for low.
  • GLM 5.3 needs a top-up before use. Gemma 4 VL 26B works on the free starting credit, so a prototype built on free credit will stop working when it switches to GLM until the account is funded.

Switch with one line

Both models answer on https://inference.broadnet.ai/v1 with the same key. Change only the model field:

client.chat.completions.create(model="broadnet/gemma-4-26b-a4b", messages=msgs)  # or "broadnet/glm-5.3"

In short: Gemma 4 VL 26B is best for BroadNet’s lowest per-token price, trying the API on free credit, and flat-price hourly keys; GLM 5.3 for tool calling and structured output over very long context. New to the API? Start with the Python SDK guide or Node guide, or compare every model.

Get startedSee all prices

Questions

Is BroadNet Gemma 4 VL 26B cheaper than GLM 5.3?

On the support chatbot workload, yes: $19.40 a month against $131.57. Gemma 4 VL 26B is cheaper on support chatbot, rag answers, document extraction; GLM 5.3 on coding agent. The coding agent does not fit Gemma 4 VL 26B’s context window.

Which uses fewer tokens for Arabic, Gemma 4 VL 26B or GLM 5.3?

Gemma 4 VL 26B. In our measurement on the same Modern Standard Arabic text, Gemma 4 VL 26B used 202.7 tokens per 100 words and GLM 5.3 243.9, so GLM 5.3 needs 20% more tokens. Sending a million Arabic words costs about $0.20 on Gemma 4 VL 26B and $1.90 on GLM 5.3.

How much text fits in the context window of Gemma 4 VL 26B and GLM 5.3?

Gemma 4 VL 26B reads 32,768 tokens, about 25,000 English words or 16,000 Arabic words; GLM 5.3 reads 1,048,576 tokens, about 813,000 English words or 430,000 Arabic words, prompt and answer together, based on our measured tokens per word.

Can I use Gemma 4 VL 26B or GLM 5.3 on a flat plan, free credit or an hourly key?

Neither is on an unlimited plan; those run DeepSeek V4.1 Flash only. BroadNet Gemma 4 VL 26B is the hourly-key model at $0.50 an hour and works on the $5 free credit without a top-up.

Can I send an image to GLM 5.3?

No. BroadNet lists GLM 5.3 for text input only. Have a vision model such as Gemma 4 VL 26B or Qwen3.8 27B read the image into text, then send that text to GLM 5.3.

Can Gemma 4 VL 26B replace GLM 5.3 to save money?

Only for requests under 32,768 tokens that do not need tool calling or structured output. For those, the saving is large. Long-context, tool-using and agentic work still needs GLM 5.3 or DeepSeek V4.1 Flash.

Read as MarkdownAsk ChatGPTAsk ClaudeAsk Perplexity